Jotun Paints

Product Details:

Product description Jota prime Mastic is a two-pack, surface tolerant epoxy mastic coating.Recommended use Anti-corrosive primer for steel structure above water. Jotaprime Mastic is suitable for on-board maintenance where blast cleaning may not be possible and extended durability is not required.

Condition during application The temperature of the substrate should be minimum 10°C and at least 3°C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.

Product Details:

Hardtop AS is a two-pack polyurethane topcoat with excellent gloss and colour retention. Hardtop AS bases are intermediates and need to be processed before use.Recommended useAs topcoat over an epoxy/epoxy mastic system where a durable, high gloss finish is required inaggressive atmospheric exposure. Cures at low temperatures. The temperature of the substrate should be minimum 0°C and at least 3°C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is usually required in confined areas toensure proper drying.

Product Details:

Pilot Primer is an alkyd based primer with zinc phosphate as active corrosion preventing pigments. This product is certified not to spread surface flames, IMO FTPC Part 5 (IMO Res. A.653(16)) / IMO FTPC Annex2 Item 2.2. As a primer for steel and aluminium structures as part of a suitable alkyd system. Pilot Primer is resistant to dry heat upto 120°C. All surfaces should be clean, dry and free from contamination. The surface should be assessed and treated in accordance with ISO 8504.Bare steel Cleanliness: Blast-cleaning to Sa 2½ (ISO-8501-1:2007). Power tool cleaning to min. St 2 (ISO 8501-1:2007) may be acceptable, subject to exposure conditions.

Product Details:

To meet diverse requirements of our prestigious clients, we are engaged in providing pristine grade Jotamastic 87 Aluminum Paint. These aluminum paints are suitable for use as a dielectric shield around impressed current cathodic protection (ICCP) anodes onships. Our offered aluminum paints are tested by experts so as to dispatch a quality assured range from our end. In addition to this, these aluminum paints are available with different hardeners for varying substrate temperatures.

Features:

• Gives excellent corrosion protection both in salt and fresh water
• Zero side effects
• Longer shelf life

Other Details:

• A two component surface tolerant, abrasion resistant, high solids polyamine cured epoxy mastic coating which may beapplied in high film thickness.
• Available with different hardeners for varying substrate temperatures, Standard (Std) and Wintergrade (WG).
• This product is a part of a complete system which is certified not to spread flames.
• Steel where blast cleaning may not be possible, and on hydrojetted surfaces still being moist where gloss retention is of minor importance.
• Suitable for use as a dielectric shield around impressed current cathodic protection (ICCP) anodes onships.
• Can be used alone or in combination with various systems of primers and topcoats.
• Gives excellent corrosion protection both in salt and fresh water.
• If exposed to sunlight chalking may occur.For application in water ballast tanks at new building stage in accordance with PSPC (IMO Res. MSC 82/W), see the "Application procedure for water ballast tanks - Jotamastic 87".

Product Details:

We have gained immense recognition in the industry by providing pristine grade Jotun Anti- Skid Paints. Our offered anti skid paints are processed using high grade chemical compounds and modern methodology in line with industry standards. These anti skid paints are available inextra coarse, coarse, medium and fine particle sizes. Jotun Anti-Skid is aluminum oxide grains, intended to be spread into the last coat in a non-skid system.

Features:

• Glossy color
• Highly effective
• Longer life span

Other Details: 

• Jotun Anti-Skid is aluminum oxide grains, intended to be spread into the last coat in a non-skid system. Available inextra coarse, coarse, medium and fine particle sizes.
• For use on decks, floors, gangways and other areas where additional friction properties are required. The spreading is totake place in the wet film during application.
• The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in adry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.

Product Details:

We Ashok Paint Agencies authorised stockists & distributtors of Industrial & Decorative Paints. 
Jotamastic 70 is a two component phenalkamine cured epoxy mastic coating with high volume solids. It is surface tolerant and fast drying, and can be used as a primer or mid coat for long-lasting protection in atmospheric environments.

Product Details:

Jotun Alkyd Primer . 
We Ashok Paint Agencies authorised stockists & distributors of Industrial & Decorative Division. 
This is a one component oxidatively drying alkyd coating. Can be used as primer or mid coat in atmospheric environments. Suitable for properly prepared carbon steel, aluminum and wooden substrates.

Product Details:

Pilot II is an alkyd based topcoat for both exterior and interior use. This product is part of a complete system which iscertified not to spread surface flames. Pilot II bases are intermediates and need to be processed before use. Topcoat in a traditional alkyd system suitable for steel and woodwork. Good weather and colour stability. Good hiding power. The temperature of the substrate should be minimum 3ºC above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure correct drying

Product Details:

With the support of our highly experienced team of experts, we are providing an optimum quality Jotatemp 650 Anti Corrosive Paints. The offered anti corrosive paints are especially suited for preventing corrosion under insulation during construction and shut down/low temperature periods. Our provided anti corrosive paints are processed with advance methodology keeping in mind the standards of quality under the direction of vendor’s experts. These anti corrosive paints are available in different packaging options in order to cater client’s demands.

Features:

• Top quality
• Reliable
• Long term effects

Other Details:

• A high-build, one-component Inert Multipolymeric Matrix coating designed to provide corrosion protection of structures exposed to extreme high and/or extreme low temperatures.
• Recommended use Corrosion protection of insulated and none-insulated carbon steel and stainless steel with dry operating surface temperatures that can range from cryogenic to above 650 ºC (intermittent 720 ºC) including cyclic services in temperatures between -185 ºC and 540 ºC. Can be applied on hot substrates (up to 400 ºC - ref. Application Guide).
• Especially suited for preventing corrosion under insulation during construction and shut